This command enables raw input from your mouse, if set to 1 (default). When raw input is enabled, input is taken directly from your mouse and your operating system settings (like acceleration, delay, etc) will not come into play.
m_rawinput [0 / 1]
0 / 1
||Enter a 0 after the command to turn off rawinput, and a 1 after the command to turn it on (default).
This command sets your mouse sensitivity to the specified value.
This command controls the sensitivity of your Y axis . That means it only adjusts your look sensitivity when looking up or down.
This console command is used to adjust your mouse sensitivity only on the X axis , which is looking left/right.
This command is used to choose what level of custom mouse acceleration you have. It can be set to disabled, or from a couple of choices.
This is the command that sets what speed you need to be moving your mouse before the custom mouse acceleration kicks in, if you have that command enabled too.
This is the console command that determines the limit for how fast your mouse can move depending on how fast you're moving it in real life. It can be set to have no limit.
This is the command that determines what the value is for the custom mouse acceleration command. The higher this is, the faster your mouse acceleration will be.
This console command sets the mouse acceleration value for its initial threshold, up to 2x movement speed.