Command Profile

SV_MINRATE

CS2 CS:GO

This command sets the minimum bandwidth rate that is allowed for clients connected to the server. Default is 16,000. 0 disables the limit.

Syntax
sv_minrate [Bytes/s]

Description

This command sets the minimum bandwidth rate that is allowed for clients connected to the server. Default is 16,000. 0 disables the limit.

How To Use sv_minrate

  1. Enable the developer console in Counter-Strike settings.
  2. Open the console with the tilde key (~).
  3. Enter sv_minrate [Bytes/s], replacing bracketed arguments with the value you want, then press Enter.

This command is listed as compatible with Counter-Strike 2.

Syntax And Arguments

sv_minrate [Bytes/s]
Bytes/s The minimum network rate, in byte/s, that a client can have. Set to 0 to disable limit (not recommended).

Popular Categories

Multiplayer and Game Settings

Jump into this category.

Bot

Jump into this category.

HUD

Jump into this category.

All categories

Open the command directory.

Related Commands

cl_updaterate

This command is used to set the number of packets per second of updates you request from the server.

cl_upspeed

This command controls your upspeed. The default value for this is 320.

rate

This command sets the rate at which your client can receive network data in bytes. Set this to a lower value if you have a bad internet connection.

sv_maxrate

This command sets the maximum bandwidth rate allowed (both incoming/outcoming) per second (in bytes) for each connection to the server.

sv_mincmdrate

This command sets the server's minimum tick rate. This can be used to change the server to 128 tick, in combination with the sv_minupdaterate command. Default is 64 tick.

sv_minupdaterate

This command sets the minimum update rate for the server. This can be used in combation with the sv_mincmdrate command to change the server's tick rate (e.g. to 128 tick).

mp_autokick

This command sets whether or not the auto kick feature should be enabled. The auto kick feature kicks people for being idle (AFK) and team damage. Default is 1 (enabled).

cl_hideserverip

This console command is used to hide the IP of your server in your console. This is particularly useful if you're streaming and don't want viewers to be able to catch your IP address, giving them the chance the DDoS the server.